Studying of Buckling Behavior on Composite Material
In this paper the buckling behavior of composite specimen manufactured from polyester reinforced with fiberglass, jute fiber and eggshell powder were studied. Several samples with rectangular cross section area of (1.5*19) mm are prepared with length of (400, 500, and600) mm and with addition weight ratio of (5%) of different material for reinforcement, used for tensile and buckling test. Different types of natural and synthetic materials (matrix and random glass fibers
(are used first without any addition then with adding (5% SiC or 5% Eggshell powder or 5%𝐴𝐿2𝑂3) to the matrix, and Jute fibers. The critical load for its bestresults was to the random016 fiberglass without addition but its worst results were with jute addition. The results of other additions (SiC, Egg shell powder, 𝐴𝐿2𝑂3 )and matrix without addition was in between. The experimental with theoretical results has been calculate and then compared
How to Cite
The author assigns to Engineering and Technology Journal with full title guarantee, all copyrights, rights in the nature of copyright, and all other intellectual property rights in the article throughout the world (present and future, and including all renewals, extensions, revivals, restorations and accrued rights of action). The Author represents that he/she is the author and proprietor of this Article and that this Article has not heretofore been published in any form. The Author warrants that he/she has obtained written permission and paid all fees for use of any literary or illustration material for which rights are held by others. The author agrees to hold the editor(s)/publisher harmless against any suit, demand, claim or recovery, finally sustained, by reason of any violation of proprietary right or copyright, or any unlawful matter contained in the submitted article.